Innovations in product portfolio

In the course of last periods we have introduced supply of new ranges, or let us say modifications of existing bearing series. We would like to present some of them here.

 

Split cylindrical roller bearing

Split cylindrical roller bearing

Bearings for Agricultural Machinery

Ložiská pre poľnohospodársky priemysel

Insert ball bearings

Ložiská pre poľnohospodársky priemysel

Housing unit – type FG / SG / FM

Ložiská pre poľnohospodársky priemysel

Circular cast housing unit with bearing – LSGR type

Ložiská pre poľnohospodársky priemysel

Double row angular contact ball bearings

 

Single-row angular contact ball bearings with sealing on both sides

They can be used in such points, in which it is not possible to provide other type of lubrication, or in location with high dust exposure. This arrangement, however, requires application of a different internal design from the point of view of space – smaller rolling bodies, and thus having lower bearing capacity. Therefore it is necessary to consult the possibility of supply with the technical department.

7208BTNGH-2RS

7208BTNGH-2RS

 

72--BETNG-PAR

72–BETNG-PAR

Single-row angular contact ball bearings – paired

Paired bearings are suitable for arrangements, which require absorption of axial forces in both directions. They are characteristic of higher precision which enables their application in accordance with requirements of the given placement without additional adjustments. When requested, it is possible to supply pairs of bearings or supply of bearings which can be paired universally. However, it is always necessary to agree in advance in which arrangement the bearings should be supplied – with defined clearance or pre-tension.

 

Double row spherical roller bearings

In the range of double row spherical roller bearings we introduce three modifications of design:

Sealed bearings – these bearings are produced in two designs in order to enable addition of sealing mounting – with wider rings and preservation of inner design – designated CDL223xx-2RS, or with preservation of ring width but with smaller dimension of spherical rollers – designated e.g. 223xx-2RS.

22209-2RS

22209-2RS

Bearings for vibratory machines – these bearings are characteristic of application of a cage on an outer ring race way, higher precision of outer diameter and of inner design, use of spherical rollers with higher precision. They can be delivered in three cage designs: one-piece brass cage, two-piece brass cage or sheet-metal cage.

22209W603

22209W603

22209W601MA

22209W601MA

22209W604MA

22209W604MA

Bearings with the sheet-metal cage with higher bearing capacity – use of internal bearing space and bearing capacity were increased due to the fact that new shape of a cage enabled application of bigger or more rolling bodies.

...EDW33J

…EDW33J

 

PLC 512-601

PLC 512-601

Four-row cylindrical roller bearings

Bearings were designed for improvement of shaft arrangements in rolling-mills in order to increase precision of rolling. They are characteristic of wide inner ring and a pair of outer rings each with two rows of cylindrical rollers in a brass cage. Their utility is increased thanks to rings, heat-treated to bainitic structure.